TCG120 _R1.1 - March 2015
Page 8
7. Initial setup via USB
The initial setup of
TCG120
controller is done with a computer running
Windows 7
or newer
Microsoft Windows
operating system. After power-up, the controller should be connected to the
computer with USB cable. Once the USB cable is connected, the operating system automatically starts to
install the drivers for the communication with the device. The following message appears:
The following drivers will be installed:
- Microchip composite device
- USB serial port driver
If for some reason the USB serial port driver cannot be installed automatically, it must be installed
manually. The driver can be downloaded from the
TCG120
product page at
. After
successful driver installation the device will be recognized as Mass storage, the following window
appears on the screen:
The only file stored on the mass storage is a tool called “TConfig”. This tool enables the
communication between the
TCG120
and PC. After starting the TConfig tool, the following program will
appear:
Содержание TCG120
Страница 1: ......
