TCG120 _R1.1 - March 2015
Page 26
Answer:
R1=ON,R2=OFF,DI1=0,DI2=1,AI1=15.6VDC,AI2=681.3kg,S11=15.8deg,S12=---,
S21=112.8deg,S22=34.8%RH,S31=---,S32=---,S41=---,S42=---
SMS:
status˽system
Rights:
Master, Users
Description:
this message is used to request the system status – Push mode status, signal strength,
Firmware version.
Example:
status system
Answer:
PUSH=OFF,SS=67%,FWver=1.6, Call 12/100,
SMS:
status˽<param>
Syntax:
possible values of <param> are: di1, di2, ai1, ai2, r1, r2, s11, s12, s21, s22, s31, s32, s41, s42
Rights:
Master, Users
Description:
this message is used to request the state/value and description of the selected i/o.
Example 1:
status di1
Answer:
di1(Garage_door)=closed
Example 2:
status_s22
Answer:
s22(Office_humidity)=34.5%RH
SMS:
set˽<relay>=1
Syntax:
possible values of <relay> are: r1, r2.
Rights:
Master, Users
Description:
this message is used to switch ON/OFF the selected relay output.
Example 1:
set r1=1
Answer:
R1=ON,R2=OFF,DI1=0,DI2=1,AI1=15.6VDC,AI2=681.3kg,S11=15.8deg,S12=---,
S21=112.8deg,S22=34.8%RH,S31=---,S32=---,S41=---,S42=---
Example 2:
set r1=0
Answer:
R1=OFF,R2=OFF,DI1=0,DI2=1,AI1=15.6VDC,AI2=681.3kg,S11=15.8deg,S12=---,
S21=112.8deg,S22=34.8%RH,S31=---,S32=---,S41=---,S42=---
SMS:
push˽on˽<periode>˽<url>
Syntax:
possible values of <periode> are 5÷3600 seconds, <url> is the address of the remote server.
Rights:
Master
Description:
this message is used to enable and setup the PUSH mode.
Example :
push on 30 www.teracom.cc:8801
Answer:
PUSH=ON,SS=67%,FWver=1.01
SMS:
push˽off
Rights:
Master
Description:
this message is used to disable the PUSH mode.
Example :
push off
Answer:
PUSH=OFF,SS=67%,FWver=1.01
SMS:
restart
Rights:
Master
Description:
this message is used to restart the TCG120 controller.
Example :
restart
Answer:
Device restarted
Содержание TCG120
Страница 1: ......
