Teracom TCG120, Руководство пользователя

Страница: 18 / 27

TCG120 _R1.1 - March 2015 Page 18
7.2.5. System
7.2.5.1. System status
System status section shows some of the system parameters and displays the GSM network
status.
7.2.5.2. Time setup
TCG120 controller is equipped with a real-time clock. Time setup is performed in this section.
The following parameters can be set:

Time server – it is possible to choose between 2 public time servers and custom Time server
(NTP server);

Time zone – the device time zone should be set here, for GMT +2 this parameter should be
set to “+0200”;

Custom time server – the following format should be used: IPaddress:Port. For example:
209.81.9.7:123.
The current system time is sent in the status.xml file when Push mode is enabled.
7.2.5.3. GPRS setup
To set the GPRS connection it is necessary to enter the APN (Access Point Name). This setting can
be different for each GSM service provider. By default it is set to “internet”. Some providers may require
also user name and password.
7.2.5.4. Setup&Monitoring page refresh
In these sections you can set the temperature units, refresh interval of the monitoring page and
device name. The device name is included in the Status.xml file and is used for easier identification
when
TCG120 is part of larger monitoring/control systems.
All changes in above sections are saved by pressing the “Save” button.