Figure 11: GUI in standard mode
5.3.1.
Bidirectional Traffic People Counting
The three numbers below the title correspond to three meters:
●
Meter 1 displays the difference between the 2
nd
and the 3
rd
meter (People Inside:
In - Out)
●
Meter 2 counts people passing by from left to right (In),
●
Meter 3 counts people passing by from right to left (Out)
5.3.2.
Button to reset counters
●
Reset Bidirectional Counter: reset the counts to: 0 0 0
5.4.
List of sensor commands available via USB/UART
The commands listed below can be used to push default parameters to an Evo People
Counter sensor via a command line within an HTerm window, or through a Python
script for example.
Copyright
©
Terabee 2021
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
17/19
