Figure 10 - Auto-calibration command in CoolTerm software
After connecting to the device, click Connection
→
Send String in order to communicate
with the terminal emulation software. A new window will open, allowing you to send
commands to the Terabee Follow-Me system. Make sure the “Hex” checkbox is checked as
the command needs to be sent in hexadecimal, and then click the “Send” button.
7. USB operation - Master Beacon
Please refer to the section
Connecting Terabee Follow-Me to a host computer via USB
for instructions on how to send commands to Terabee Follow-Me system using a host
computer and HTerm/CoolTerm emulation software.
7.1.
List of commands
Table 3 - List of commands for Terabee Follow-Me
Command (HEX)
Command description
00 00 00 00
DEVICE INFORMATION
00 11 01 45
PRINT OUT MODE TEXT
00 11 02 4C
PRINT OUT MODE BINARY
Copyright © Terabee 2020
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
Company Confidential
14/27
