WiH130 User Guide
WiH130 - Wireless HDMI Connection System
(Mini Transmitter & Receiver Kit)
Thank you for purchasing this Wireless HDMI Transmitter & Receiver Kit. Please read the following instructions carefully for your safety and prevention of
property damage.
Do not use the product in the extreme hot, cold, dusty or humid environment.
Avoid the product dropping down to avoid damage to hardware.
The product is not water proof so do not allow any liquid to enter the unit.
Do not wipe the surface of the product with alcohol, benzene or thinners.
Do not dismantle, assemble or alter the product arbitrarily.
When the product is operating, the surface temperature will increase slightly. This is normal.
Introduction
WiH130 is a Wireless HDMI Mini Transmitter & Receiver Kit that delivers uncompressed HD video/audio 20 meters in open field. This device kits make wireless
connection from HD Media Source Devices such as Blu Ray Disc Player, PC, Game Console, Set-top Box to Display Devices like LCD, Plasma or LED TV,
Projector… while keep wire-equivalent quality and no latency.
Features
Extends HDMI or DVI signals over Wireless connection
Supports Full HD 1080p signals.
Real-time compressed audio is embedded within the HDMI output stream.
No latency transmission for high quality playback.
Supports point-to-point transmission within 70-ft (22 m)
Product Overview
WiH130 Mini Transmitter Unit (TX)
WiH130 Receiver Unit (RX)
Installation
Notes:
Each TX/RX after pairing supports only point to point operation. It does not support multi-source broadcasting by wireless connection. The Rx receiver
can be placed horizontal or vertical position, depending on your requirement, however for optimum performance it is recommended to operate in vertical position.
Before starting the installation, please ensure that all devices are powered off. The following steps are for an installation using HDMI equipment, if you are using
DVI equipment you should substitute the HDMI cables for DVI to HDMI cables where required.
