Tenovis Integral T3 Classic, Руководство пользователя

Страница: 49 / 88

Configurations
_______________________________________________________________________________
49
Programming dates for automatic night service changeover:
The following table lists the possible entries for operating states (activated/deactivated) for day
service and night services 1, 2 and 3 . Code numbers are assigned to the entries. Use these code
numbers to select the desired operating states when programming.
Since you can also activate or deactivate the operating states for “automatic night service”
manually at any time by entering the corresponding function number, you will find the
corresponding function numbers in the right-hand column of the table. These functions can also be
assigned to function keys and executed by pressing the relevant function key.
Code
number
Operating state
Status of
service
Function number
01 Day service activate *60
02 Day service activate *60
03 Day service activate *60
04 Day service activate *60
11 Night service 1 activate *61
12 Night service 1 deactivate #61
13 Night service 1 activate *61
14 Night service 1 deactivate #61
21 Night service 2 activate *62
22 Night service 2 deactivate #62
23 Night service 2 activate *62
24 Night service 2 deactivate #62
31 Night service 3 activate *63
32 Night service 3
deactivate
#63
33 Night service 3 activate *63
34 Night service 3 deactivate #63
2 start times and 2 end times can be entered for each night service.
Activating one night service deactivates another active night service. Only one night
service can be active at any time and this is always the one which was activated
most recently.