REPLACEMENT PARTS
REF. NO.
DESCRIPTION
1
Shelf
1
301
2
Left Door
1
045LD
3
Right
Door
1 045RD
4
Locking Recessed Handle
1
RH-1
5
Locking
Cam*
1 059LC
6
Cam Retainer*
1
944CR
7
Locking Bar Set
1
066LB
8
Lock Bar Guide Inserts
2
944GI
9
Drawer
1
6618DWR
10
Hanging Folder Rod
1
36HF-DWR
11
Cam
Lock 1 CL-1
12
Optional Dividers (not shown above)
--
5AD
13
Optional Cross Rods (not shown above)
--
CR15
QTY. PART NO.
1.
To move the shelf, using your
hands apply pressure to the
underside of the shelf and
tap it off the tabs.
2.
Place the shelf at the desired
level. Insert the shelf edges
into the tabs at the new
location. Be sure that the
shelf is securely fitted into the
tabs at all points of contact.
3.
The cabinet must be level
in order for the doors to
close properly. Levelers may
be adjusted by placing the
nut driver through the hole
in each end of the sill and
adjusting the leveling screw.
Ref.
No. 1
Ref.
No. 2
Ref.
No. 3
NOTE: Additional hardware may be included for replacement purposes.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.
Insert hex head driver
through hole (above) to
adjust leveler (below).
Ref.
No. 4
Ref.
No. 5
Ref.
No. 6
Ref.
No. 7
Ref.
No. 8
Ref.
No. 9
*Included in Ref. No. 4, recessed handle with keys (Part No. RH-1). May be ordered alone or as part of the full hardware set.
Ref.
No. 10
Ref.
No. 11
49B232
