OPERATION
7100 330690 (9--09)
34
5. CONVENTIONAL SCRUBBING: Adjust the
solution flow as needed.
NOTE: When using the FaST or ec--H2O system
(option), the solution flow lever is nonfunctional.
The FaST and ec--H2O system flow rates are
pre--set. The ec--H2O module has optional flow
rate settings. If solution flow adjustments are
required, contact an Authorized Service Center.
Increase flow: Push the
solution flow lever
forward. Use this flow rate for rough floors
and heavy or compacted dirt.
NOTE: For machines equipped with cylindrical
scrub heads, decrease solution flow rate when
turning.
Decrease flow: Pull the
solution flow lever
back. Use this flow rate for smooth floors
and light dirt.
Stop flow: Pull the lever all the way back.
6. Press the directional pedal forward and scrub
as required. When the machine moves
forward the scrub head will lower and the
scrub brushes will start. The rear squeegee
will lower and the vacuum fan will start. The
conventional scrubbing solution system will
start when the machine first begins to move
forward The optional ES system,
ec--H2O
system, or FaST system will start, if the
switch is on.
NOTE: The scrub head will raise when the
directional pedal is in the neutral position. The
rear squeegee will raise when the directional
pedal is in the reverse position.
NOTE: If an excess of water in the recovery tank
triggers an overflow switch, the recovery tank full
indicator will light on the control panel. All
scrubbing functions will be canceled. To turn the
indicator light off, drain the recovery tank, then
press the scrub switch.
NOTE: A low battery and a no brush current
sensed will also cancel the scrub system.
