Tennant 5300T, Руководство по обслуживанию

Страница: 43 / 98

SCRUBBING
5300T MM382 (10–94)
3Ć21
SQUEEGEE BLADES
The squeegee has two squeegee blades. The
front blade has two wiping edges. To use both of
them, rotate the blade end-for-end.
The rear blade has four wiping edges. To use
them all, start with one wiping edge. To use the
next wiping edge, rotate the blade end-for-end. To
use the next wiping edge, rotate the top edges
down, bottom edges up. To use the last edge,
rotate the blade end-for-end.
Replace any worn or damaged squeegee blades.
REPLACING OR ROTATING THE FRONT
SQUEEGEE BLADE
1. Turn the machine power off and set the
parking brake if your machine has this
option.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Turn Off
Machine.
2. Make sure the squeegee is raised off the
floor.
3. Remove the six thumbscrews holding the
retainer and squeegee blade to the
squeegee frame.
4. Pull the squeegee blade off the squeegee
frame.
5. Rotate the squeegee blade end for end to
allow a new edge to face the front of the
machine.
6. Line up the squeegee blade and the retainer
to the squeegee frame
7. Secure the blade and retainer to the
squeegee frame with the six thumbscrews.
09532