ST-141/ST-141D
- 1 -
1
1 Introduction
This meter can measure the vibration by the rotator
and the reciprocator, as well as the damage of
bearings. The items include acceleration, velocity,
and displacement; through the meter, you can
determine if to repair or renew the machines.
2 Accessories
1 Meter
1
User’s Manual
2 Accelerometer
2 Low noise cable
2 Magnetic base
6 1.5V LR6/AA battery
1
1
Carrying case
9V AC to DC adaptor
1 USB cable and Installation disk (ST-141D)
1
Handheld probe + round probe + pointed probe
3 Safety Precaution
Caution! Please refer to this manual.
Improper use may damage the meter
and its components.
Complies with European Directive
Do not operate in environments with flammable gas or
humid environments.
Operating altitude: up to 2000M.
Operating environment: Indoor use; Pollution degree 2.
Clean with soft cloth when dirty, such as glasses cloth.
Do not clean with chemicals and other solvents.
EMC: EN61326-1:CISPR 11:Group 1, Class B
Class B
–
Equipment for use in all establishments other
than domestic.
Group 1
–
RF energy generated is needed for internal
functioning.
