Tenma 72-9280 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 81

Tenma 72-9280 Скачать руководство пользователя страница 5

4

Overview

This Operating Manual covers information on safety and cautions. Please read the relevant
information carefully and observe all the Warnings and Notes strictly.

Warning

To avoid electric shock or personal injury, read the “Safety Information” and “Rules for Safe
Operation” carefully before using the Meter.

Automotive Digital Multimeter Model 72-9280 (hereafter referred to as “the Meter”) is a 4000 counts,
3-3/4 digits manual ranging meter. The meter uses large scale of integrated circuit with integrated A/D
converter as its core. Spotting a unique design with an extra large LCD display. Connect Test Leads
display, full overload protection and unique outlook design. For this reason, it emerges as an electric
meter with more outstanding performance for safer operation than other meters. In addition to the
Dwell, Tach and Data Hold feature, the Meter can be used to test the AC/DC voltage, AC/DC current,
resistance, frequency, diode, continuity, and Capacitance.

Unpacking Inspection

Open the package case and take out the Meter. Check the following items carefully to see any
missing or damaged part:

Item Description

Qty

1

Operating Manual

1 piece

72-9280: OPERATING MANUAL

«
...
3
4
5
6
7
...
»

Содержание 72-9280


















































































Отзывы:

Нет отзывов