Mini Tilt Wheelchair
Document No: 054-01 v6
Page 9 of 28
January 2014
Mintilt (newstyle) user manual.doc
It is also possible to adjust the position of
the lever arm without releasing the handle.
To do this, place your thumb or a finger on
the red button, and pull back on the lever.
Then simply rotate the lever arm to the
desired position and release.
The lever is spring-loaded and will snap
back into its normal working position.
IMPORTANT: Do not attempt to hang
anything on the clamping lever. The
leaver is not intended to carry load and
doing so may break the lever.
Fig 4.2.3
4.3: Fit and adjust the armrests:
Fig 4.3.1
To fit the armrest, loosen thumbscrew A
(turn anti clockwise) and release the spring
catch B by turning 90 degrees in either
direction. Whilst holding catch B in this
position, push the armrest into the socket.
Ensure that the holes on the armrest stem
are facing catch B.
To lock: Release catch B when the armrest
is at the desired height, and tighten
thumbscrew A to secure.
To adjust the height, loosen the thumbscrew
and release catch B, adjust the height and
lock as described above.
TIP: When folding the wheelchair for transport, always remove the armrest first, and then
fold the back.
