Tenda W311P+, Руководство пользователя

Страница: 50 / 54

150Mbps Wireless PCI Adapter User Guide
Solution : Microsoft ICS service can only combine one group of
WAN and LAN. This message indicates ICS may have been
enabled by other network adapters.
1. Please manually cancel ICS or cancel after restarting, then
switch to AP mode.
2. This dialogue box appears because virtual wi-fi miniport
adapter can only be used by one wireless network at a time. Please
disable other non- Tenda wireless network adapters and re-switch
to AP mode.
Problem4 : Client can not obtain IP when connected to soft AP of
the wireless network adapter.
Solution : Manually configure an IP address at the same net
segment with that of AP and the gateway as the AP‘s IP address,
Then communication can be achieved .
Problem5 : Some UI buttons are grey and can not be used.
Solution : That’s because you have switched to Zero config mode,
please right click the Tenda UI on the lower right corner of your
desktop. Operations can be done after you have switched to Tenda UI.
Problem6 : Under Windows 2000 system, IP address can not be
obtained when it is switched to AP Mode.
Solution : Under Windows 2000 system, you have to manually
configure sharing and then switched shift to AP to obtain an IP
address of 192.168.0.1
-46-