Tenda FH456 Скачать руководство пользователя страница 78

Страница: 78 / 82

Appendix

2 FAQs

Read the following

Frequently Asked Questions

if you are running into problems.

Q1: I cannot log in to the wireless router’s User Interface. What should I do?

A1:

Please follow the instructions below step by step.

a. Verify the Ethernet cable between your computer and the router is intact and well-connected. If not,

use another Ethernet cable.

b. Clear cache of your browser, or open another web browser.

c. Double check the TCP/IP settings on your computer. Verify if it is set to obtain an IP automatically.

d. Press and hold the

WPS/RST

button

for about 8 seconds, and then release it to restore factory

settings; then try to login again.

e. Try to login on another computer, smart phone or iPad.

Q2: I forget my WiFi password, what should I do?

A2:

Please follow the instructions below step by step.

a. Log in to the wireless router’s User Interface, and find

Wireless > WiFi Name and Password

b. If you also forget the login password unfortunately, restore the router to factory default, and set up

a WiFi password and a login password again. There are no WiFi password and login password by

default.

Restore Method: Press and hold the

WPS/RST

button

for about 8 seconds and then release it.

Q3:

I cannot access the Internet after completing the configuration according to the instructions. What

should I do?

A3:

Please follow the instructions below step by step.

a. Please check the connection and verify if it is well-connected.

b. Check whether you can access the Internet by connecting to the modem directly (without the router).

If not, please double check the configuration of your modem or consult your ISP.

Содержание FH456



















































































Результаты поиска

Содержание FH456

Отзывы:

Tenda FH456, Руководство пользователя, Страница: 78 / 82

Результаты поиска

Содержание FH456

Отзывы: