4
Unpacking and Installing the Heater
• Open the packaging carefully and remove the appliance. Keep the
original packaging for future transport or references.
• Keep the front of the appliance through which the heat is radiated
at least one metre away from furniture, curtains and other flamma-
ble objects at all times.
• Ensure there is a grounded socket nearby (back of the appliance).
• Never use an extension lead. The mains cable must remain at the
back of the appliance and must not be in contact with any hot ele-
ments.
Operating Instructions
To switch on:
• Plug the appliance into the socket.
• The control switches are on the right side of the machine.
• For the flame effect, turn the right switch “ON” ( if only the lighting is
switched on, the power consumption is approximately 40W)
• For a low level of heating, turn on switch “I”
• For a high level of heating, turn on switch “II”
Special characteristics of this heater
• The smoldering glow of the flames can hardly be distinguished from
that of a real fireplace.
• The appliance produces the effect of a hot current of air.
• Automatic and constant temperature control.