Tempest Tornado Marine G4, Руководство пользователя

Страница: 16 / 47

Tornado G4 User Manual 16
For single feed wiring, no modification to the DEC4
Controller motherboard is needed.
IMPORTANT:
For split feed wiring, use a side cutter to cut both AC links at both
ends:
Single Feed Power Termination

Connect Earth/Ground wire to Ground Terminal

Connect Live and Neutral to the terminals marked
FEED
Split Feed Power Termination

STOP! Did you cut the power links? See above.

Connect Earth/Ground wire to Ground Terminal

Connect Enclosure feed to the terminals marked FEED

Connect Luminaire feed to the terminals marked SPLIT
SEE WIRING DIAGRAMS BELOW
AC Supply Voltage
Tempest Tornado enclosures require supply voltage in
the nominal range 200-250VAC, 50/60Hz.

North American installations – use a 208V
supply (2 x 120V hots), and connect one hot to
Line and one to Neutral terminals.

North American 120V versions are available to
special order.