Cyclone User Manual
67
Indirect Firmware Updates
Requirements
Windows Laptop / PC, Windows XP through Windows 10
A JESE RDM-TRI or RDM-TXI interface and USB connection (available from Tempest).
An installed version of the JESE GetSet RDM configuration utility.
A copy of the firmware file(s) to upload, available for download from
www.tempest.biz/tech_support
.
Powered Target DEC4 with 51.485 RS485 communication interface card.
Installation Procedure
1.
If not already installed, install a copy of GetSet.
To ensure that the
correct USB drivers are loaded, the software should be installed and
the PC/Laptop re-started before connection to an RDM-TRI.
2.
If using an Asian character set, go to control panel and select Region
and Language. Ensure input locale for non Unicode programs is set to
a non Asian language
