background image

 

6

 

 – 

 

English

 

SAFETY INSTR

 

UCTIONS

 

 

Use leg-guards recommended for the material to be cut.

Boots with steel toe-caps and non-slip sole

Always have a first aid kit nearby.

 

Mac

 

hine

  

′′′′

 

s safety equipment

 

This section descr

 

ibes the machine

 

 

s safety equipment, its 

purpose, and how checks and maintenance should be carried 
out to ensure that it operates correctly. See the ”What is 
what?” section to locate where this equipment is positioned 
on your machine.

 

Vibration damping system

 

Y

 

our machine is equipped with a vibration damping system 

that is designed to reduce vibration and make operation 
easier.

The machine

 

 

s vibration damping system reduces the transfer 

of vibration between the engine unit/cutting equipment and 
the machine

 

 

s handle unit.

The engine body, including the cutting equipment, is insulated 
from the handles by vibration damping units.

 

Stop s

 

witch

 

Use the stop s

 

witch to switch off the engine.

 

Muffl

 

er

 

The m

 

uffler is designed to keep noise levels to a minimum and 

to direct exhaust fumes away from the user.

 

Thr

 

ottle lockout

 

The throttle tr

 

igger lock is designed to prevent accidental 

operation of the throttle. When the lock (A) is pressed in this 
releases the throttle (B).

The trigger lock remains pressed in as long as the throttle is 
pressed. When the grip on the handle is released the throttle 
trigger and the throttle trigger lock both return to their original 
positions. This is controlled by two independent return spring 
systems. This means that the throttle trigger is automatically 
locked in the idle position.

!

 

W

 

ARNING! Never use a machine that has 

faulty safety equipment! Carry out the 
inspection, maintenance and service 
routines listed in this section.

!

 

W

 

ARNING! The muffler gets very hot in use 

and remains so for a short time afterwards. 
Do not touch the muffler if it is hot!

!

 

W

 

ARNING! The exhaust fumes from the 

engine are hot and may contain sparks 
which can start a fire. Never start the 
machine indoors or near combustible 
material!

IMPORTANT INFORMATION

 

F

 

or mufflers it is very important that you follow the 

instructions on checking, maintaining and servicing your 
machine. See instructions under the heading Checking, 
maintaining and servicing the machine’s safety equipment.

!

 

W

 

ARNING! The inside of the muffler contain 

chemicals that may be carcinogenic. Avoid 
contact with these elements in the event of a 
damaged muffler.

A

B

Содержание 396K
























Отзывы: