TemperZone TZT-100, Руководство пользователя, Страница: 9 / 24

After Hours Run Timer
For convenience, the installer may have set the after-hours run function. This function
permits you to temporarily turn the thermostat back on for an installer pre-set period
of time if the “Stop” program is running, at the conclusion of which the thermostat will
automatically turn back off again.
To activate the after-hours run timer, simply tap the
“O/RIDE” button. (Or, the optional “After Hours” run
button on the remote room temperature sensor.) The LCD
will show the word “Override” flashing in the LCD.
You can cancel any unexpired portion of the timer period
by tapping the
“O/RIDE” button again. The word
“Override” will vanish from the screen.
To Review the Set Temperature:
Simply tap the up ( ) or down ( ) button to first turn the LCD backlight then again to
display the currently set temperature.
Your Installer may have set a default “Start” event temperature that will be used at the
commencement of each day; this will override any previous day’s temperature
adjustments.