P a g e
|
29
TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ.
Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1
Esenyurt
/ İstanbul / TÜRKİYE
TEL: +90 (212) 544-2518 FAX: +90 (212) 577-6557 www.temelsan.com [email protected]
TIMER ANNEALING
HOW TO USE THE TIMER ANNEALING
1.
Position the Clamping Jaws to Annealing ready position
2.
Place the Band to Anneal inside the jaws and clamp it (think about Jaw Leveling)
3.
Adjust the ANNEALING SEC. between 030 and 060
4.
Select but do not confirm the ANNEALING CURRENT
5.
Press START button
6.
While
machine is start to make annealing you can use “+” and “-“ buttons to
adjust annealing current.
SUMMARY OF FUNCTIONALITY TYPES
Explanation of used Technical Names
Welding:
The Welding means only for creating the putt-weld without any
Annealing.
Annealing:
It is the procedure after Weld to soften the Burr and Welding Area for making
Metal elastic and Grind able. Without Annealing the weld would broken like
glass.
Manual Operation;
Welding
Stop by Self when welding only is done, Jaws keeps
clamped.
Annealing
The Operator has to unclamp the jaws, for annealing position operator
has to press annealing ready button, the operator has to clean by
press-air between the jaws, has to place the blade well centered into
jaws, has to clamp the jaws and start the Annealing Procedure.
The Timer Annealing is a by pre-adjusted
power flow created heat system. The real
temperature is not readable but in
percentage of power flow timer controls
the Heat-period.
VALUE ADJUSTMENT BUTTON (+)
VALUE ADJUSTMENT BUTTON (-)
ANNEALING CURRENT SELL. BUTTON
SET BUTTON
ANNEALING READY BUTTON
OPERATION START BUTTON
