P a g e
|
22
TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ.
Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1
Esenyurt
/ İstanbul / TÜRKİYE
TEL: +90 (212) 544-2518 FAX: +90 (212) 577-6557 www.temelsan.com [email protected]
13.
JAW LEVEL CALIBRATION (CLAMPING JAW ANNEALING PRESSURE POINT)
There is on both Clamping Jaw Blocks a Jaw Level adjustment Screws they makes the
adjustment very easy.
With changing of Annealing Press Point we are able to clamp properly all different width
of Metal-Band
Band Clamping Pressure Point
Where the pressure is higher, there is more electric connectivity, so the heat we want to
create for proper annealing is there as highest. The goal is to create similar heat on all width of
Metal-Band
.
LOWER JAW
UPPER JAW
JAW LEVEL
ADJUSTMENT SCREWS
UPPER CLAMPING JAWS
SAAT
YÖNÜNE ÇEVİRİRSENİZ ARKASI FAZLA MENEVİŞLENİR
IF YOU TURN ON CLOCKWISE BACK SIDE WILL BE MORE ANNEALED
SAAT
İN TERSİ YÖNÜNE ÇEVİRİRSENİZ ARKASI FAZLA MENEVİŞLENİR
IF YOU TURN ON COUNTERCLOCKWISE BACK SIDE WILL BE MORE ANNEALED
