P a g e
|
11
TEMELSAN MAKİNA SAN. VE TİC. LTD. ŞTİ.
Akçaburgaz Mah. Muhsin Yazıcıoğlu Cad. No:55/1
Esenyurt
/ İstanbul / TÜRKİYE
TEL: +90 (212) 544-2518 FAX: +90 (212) 577-6557 www.temelsan.com [email protected]
FIRST CONNECTIONS
POWER SUPPLY (Wiring draw see at following page)
A qualified electrician must do the connection.
The input voltage (standard norm) is 400V AC (3 Phase + N Ground) 50Hz.
The input voltage (US Norm) is 600 V AC (3 phase + N Ground) 60 Hz. (optional)
The recommended fusing for power supply is
40 Amp fuse
,
sluggish type
The Diameter of each wire for power supply it's very important, please use the chart by
selecting the Machine Type
Do not switch ON the machine before the all setup instruction is read and work performed
Pay special attention to protect yourself from the energized cables moreover the control panel
while operating the machine. Keep closed the cover of electrical control panel and do not forget
to take out all the foreign objects in the cabinet which might cause short circuit.
-
Working on the electrical power supply has to be only done by professional electrician.
-
The electrical equipment of the machine must be checked regularly
-
Always keep the switching cabinet locked. Access is only permitted to authorized personnel
with the key or special tool.
-
Remove at once any loose or worn cables
-
If it is essential to work on parts carrying a current there must be a second person present to
turn off the main switch in case of an emergency
-
The customer is required to comply with the technical conditions and requirements of the
relevant electrical power supply company
Make sure that the main switch of the machine is on OFF
position and prevent to be turned on by an accident.
ATTENTION!
WARNING!
