Teltronics SEB NET-PATHm, Инструкция по установке и эксплуатации

Страница: 50 / 64

Indicators and Diagnostics
Page 4-2
System Reset
Button
The recessed Reset button on the back of the NET-PATHm resets the microprocessor
in the NET-PATHm and initiates a warm boot. Both warm and cold boots may result
in the loss of active event data. Data stored in flash memory is not affected.
UPS Off Button
To power down the NET-PATHm, remove commercial power; then, press the UPS Off
button on the back of the unit. The NET-PATHm performs a safe shutdown.
Modems
International Modems
When installing the NET-PATHm remote agent, you may need to adjust the modem’s
country code setting for Multi-Tech modems with model number MT5634SMI.
To display the country code currently in use:
Type “Status Modem” on the command line. The system returns the modem
initialization string characters (shown below) in the Country Code field.
Table 4-1: Country Code Definitions for Multi-Tech Modem Model MT5634SMI
NET-PATHm
Country Code Countries Modem Initialization String
1 New Zealand at%t19,0,9
2 Hong Kong
Hungary
India
Indonesia
Israel
Malaysia
Philippines
Poland
Singapore
Slovenia
South Korea
Vietnam at%t19,0,30
3 Czech Republic at%t19,0,25
4 South Africa at%t19,0,35
5 Argentina
Aruba
Austria
Bahrain
Belgium
Brazil
Brunei
Canada
Cayman Islands
Chili
China
Columbia
Costa Rica
Denmark
Equador
Egypt at%t19,0,34