Teltronics BEM24 Скачать руководство пользователя страница 40

Страница: 40 / 89

Intercom (C

) Calling

To Make an Intercom (COM) Call:

If the COM button is set up:

1. Lift the handset, then press the C

button.

2. Dial the desired extension number, or

press the DSS button for the desired
extension number, if available.
or
Press the C

button a second time if the extension

number you want to COM call is stored.

If the COM button is not set up:

Lift the handset and dial the COM Calling access code,
followed by the desired extension number.

Note:

COM Calls (internal only) override “Call Forward” and ring the called
extension with a distinctive tone. COM calls to shared secondary
extensions can be answered by anyone in the group.

COM calls to shared “primary” (extension of teleset) will only ring at the
“primary” telesets (the red lamp will be steady Red on shared telesets.)

To Place Callback or Call Waiting on a “Forwarded” Extension using
COM Calling:

1. Hang up after reaching the “forwarded to” destination.

2. Press the C

button, or dial the COM Calling access code, followed by

the extension number.
Hear a busy tone or ringback.

3. Dial the Callback access code (2) while hearing a busy tone or ringback or

the Call Waiting access code (8) while hearing a busy tone.

EXT:

OR PRESS COM KEY

EXT: 5422
OR PRESS COM KEY

R MADHAVAN

00:05

Содержание BEM24


























































































Результаты поиска

Содержание BEM24

Отзывы:

Бренды по названию

Популярные бренды

Teltronics BEM24, Руководство пользователя

Результаты поиска

Содержание BEM24

Отзывы:

Бренды по названию

Популярные бренды