Teltonika FMB630, Руководство пользователя

Страница: 99 / 173

99
Command Description Response
flush
#,#,#,#,#,#,#
Initiates all data sending to specified target server
1.# - IMEI
2.# - APN
3.# - LOGIN
4.# - PASS
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP) Yes
sn x [x=0;1] Enable/disable static navigation Yes
banlist Banlist information Yes
crashlog Crash log information Yes
delete_all_sms Delete all read SMS No
getgnss Current GNSS information Yes
odinfo Current odometer information Yes
prof2backup Saves configuration to backup Yes
backup2prof Recovers saved profile Yes
backupinfo Backup information Yes
14.1 getstatus
Table 36 getstaus command response
Response details Description
Data Link Indicate module connection to server at the moment: 0 – Not connected, 1
– connected
GPRS Indicate if GPRS is available at the moment
Phone Voice Call status: 0 – ready, 1 – unavailable, 2 – unknown, 3 – ringing, 4 –
call in progress, 5 – asleep
SIM SIM Status: 0-ready, 1-pin, 2-puk, 3-pin2, 4-puk2
OP Connected to GSM Operator: Numerical id of operator
Signal GSM Signal Quality [0-5]
NewSMS Indicate if new message received
Roaming 0 – Home Network, 1 – roaming
SMSFull SMS storage is full? 0 – ok, 1 – SMS storage full
LAC Location Area Code
Celll ID Cell ID
Network Type Information about connected network: 0 – 3G, 1- 2G
Active SIM Active SIM
Answer Example: Data Link: 1 GPRS: 1(1) Phone: 0 SIM: 0 OP: 22288 Signal: 5 NewSMS: 0
Roaming: 0 SMSFull: 0 LAC: 26050 Cell ID: 34371 Network Type: 1 SIM1
14.2 getweektime
Table 37 getweektime command response
Response details Description
Clock Sync Indicates system clock synchronization status. 0 – System is not
synchronized, 1 – System synchronized