Teltonika FMA120, Руководство пользователя

Страница: 93 / 106

93
Data Acquisition Type – defines when to generate event – when value enters defined
range, exits it or both, also is possible to select event which you want to generate then you
change values, like crossing both values in high and low levels (Hysteresis).
High and Low levels – defines CAN value range. If CAN value enter or exits this range,
FMA120 generates event by “Data Acquisition Type” settings. Figure 57 show example of
FMA120 CAN configuration.
Figure 57 Configurator example
Available CAN Bus IO parameters and configuration can be found in Configurators CAN tab
(Figure 59) and in next chapter “Parameters ID”.
Send data with 0, if ignition is off. Depending on LVCAN/ALLCAN I/O parameters and
ignition status, FMA110 can send locked (last known) LVCAN/ALLCAN I/O parameters values,
reset values (set to 0) and active (real time) parameters values. When ignition is off,
LVCAN/ALLCAN I/O parameters values sent to server are:
Speed reset
Accelerator pedal position reset
Total fuel used lock
Fuel level (liters) lock
Engine RPM reset
Total mileage lock
Fuel level (proc.) lock