Teltonika FM6320 Скачать руководство пользователя страница 139

Страница: 139 / 139

139

CHANGE LOG

Nr.

Date

Version

Comments

2016-06-21

v1.01

Changed FM6320 interfaces list, I/O parameters list, all parameters ID,

multiple parameters configuration format. Added descriptions to new
configurator’s tabs.

2016-06-21

V1.02

Changed KLN-200 and FM6320 connection to tachograph

2016-06-22

V1.03

Changed KLN-200 figure, fixed information about interfaces, changed

accelerometer updating frequency, added some references, added examples
of SMSevent and WeekTime configuration.

2016-07-26

V1.04

Added older tachograph version identification, changed scenarios

functionality according to newest modifications.

2016-08-05

V1.05

Added one more supported tachograph version. Added all supported

operating systems versions.

2016-08-29

V1.06

Added working time from internal battery, changed K line parameters

configuration via sms explanation, corrected tables formatting, changed
scenarios configurable parameters description.

2016-09-30

V1.07

Fixed speed based tracking, changed first page photo, changed interfaces

list, changed modem version.

2016-10-05

V1.08

Added specifications and warnings for LVD.

2016-10-31

V1.09

Minor fixes regarding naming of figures and sms parameters table

improvements;

2016-11-02

V1.10

Removed Kln-200 mounting description, added direct tachograph

description;

2016-12-01

V1.11

Added CAN accessories, AutoCAN description, sleep mode, TCP link mode

functionality, updated GNSS status tab, added TACHOCHECK sms
description.

2016-12-13

V1.12

Fixed descriptions of TCP link modes, information about battery.

2017-01-07

V1.13

Added Stoneridge tachograph configuration description for K-Line data.

Содержание FM6320












































































































































Результаты поиска

Содержание FM6320

Отзывы:

Teltonika FM6320, Руководство пользователя, Страница: 139 / 139

Результаты поиска

Содержание FM6320

Отзывы: