Teltonika CAN-CONTROL, Руководство пользователя, Страница: 6 / 16

6
3.1.3 Selecting CAN-CONTROL program number manually
Steps to set program number:
•
Hold SWITCH down until LED starts blinking.
•
Release the SWITCH.
•
Then LED starts blinking and counting first digit of program number (one blink means digit 1,
two blinks mean digit 2 etc).
•
To stop counter push SWITCH.
•
Release the SWITCH, then LED starts blinking and counting second digit of program number.
•
To stop counter push SWITCH.
•
Release the SWITCH, then LED starts blinking and counting third digit on program number.
•
To stop counter push SWITCH.
•
Release the SWITCH, then LED starts blinking and counting fourth digit on program number.
•
To stop counter push SWITCH.
•
Release the SWITCH, then LED starts blinking and counting fifth digit on program number.
•
To stop counter push SWITCH.
•
Release SWITCH, if programming is successful LED will blink 10 times.
Figure 3 Can Adapter