Teltonica RUT9003G, Руководство пользователя, Страница: 78 / 141

6.7 Static Routes
Static routes provide a way of entering custom entries in the internal routing table of the router.
Field name Value Explanation
1. Interface LAN/WAN/PPP/WAN2 The zone where the ‘Target’ resides
2. Target IP address The source of the traffic.
3. Netmask IP mask Mask that is applied to the Target to determine to what actual IP
addresses the routing rule applies
4. Gateway IP address To where the router should send all the traffic that applies to the
rule
5. Metric integer Used as a sorting measure. If a packet about to be routed fits two
rules, the one with the higher metric is applied.
Additional note on Target & Netmask: You can define a rule that applies to a single IP like this: Target - some IP;
Netmask - 255.255.255.255. Furthermore you can define a rule that applies to a segment of IPs like this: Target – some
IP that STARTS the segment; Netmask – Netmask that defines how large the segment is. E.g.:
192.168.55.161 255.255.255.255 Only applies to 192.168.55.161
192.168.55.0 255.255.255.0 Applies to IPs in range 192.168.55.0-192.168.55.255
192.168.55.240 255.255.255.240 Applies 192.168.55.240 - 192.168.55.255
192.168.55.161 255.255.255.0 192.168.55.0 - 192.168.55.255
192.168.0.0 255.255.0.0 192.168.0.0 - 192.168.255.255
78