Telsey Telecommunications FS100 series, Руководство пользователя

Страница: 27 / 31

Telsey Telecommunications
-
27
-
Warning: Operating Temperature. This product is designed for a maximum ambient temperature of 70°
degrees C.
Warning: As a safety precaution, install a circuit breaker with a minim value of 20 Amps
between the equipment and the power source. Always connect the wires to the LAN equipment
first before you connect the wires to the circuit breaker. Do not work with HOT feeds to avoid
the danger of physical injury from electrical shock. Always be sure that the circuit breaker is in the OFF
position before connecting the wires to the breaker.
Warning: Do not strip more than the recommended amount of wire. Stripping more than the
recommended amount can create a safety hazard by leaving exposed wire on the terminal
block after installation.
Warning: When installing this equipment, always ensure that the frame ground connection is
installed first and disconnected last. The power source for the Switch should be located near
the unit and should be easily accessible.
Warning: Check to see if there are any exposed copper strands coming from the installed wire.
When this installation is done correctly there should be no exposed copper wire strands
extending from the terminal block. Any exposed wiring can conduct harmful levels of
electricity to persons touching the wires.
Caution: Do not install in direct sunlight, or a damp or dusty place. Do not expose the Switch
to moisture or water.
Caution: If the Switch is installed indoors, make sure that the site is a dust-free environment.
The site should provide for easy access to the ports of the gateway device. This will make it