Telpar MTP-2242, Руководство пользователя

Страница: 28 / 50

Telpar, Inc. MTP Series Receipt Thermal Printer User Manual

2011 Telpar, Inc. (Rev.20110809) Page 28
4.3 Serial (RS-232C) Interface
4.3.1 Serial (RS-232C) Interface Specification
Serial (RS-232C) Interface Specification
Item Specification
Data receive speed Baud rate selected at factory (written in flash). Default
baud rate is 115200 bps. Default Data Bits = 8,
default Stop Bits = 1, Default Parity = none
Synchronizing method Asynchronous, Full duplex
Handshake Hardware or XON/XOFF
Input output level RS-232C
Signal level
Space (logic=0) +3 V

+12 V
Mark (logic=1) -3 V

-12 V
04.3.2 Serial I/O Connector
J9 Pin # Function:
1 NA
2 DTR Data Terminal Ready, Output from printer)
3 TxD (Transmit Data, Output from printer)
4 CTS (Clear To Send, Input to Printer)
5 RxD (Receive Data, Input to Printer)
6 RTS (Request To Send, Output from Printer)
7 DSR (Data Set Ready, Input to Printer)
8 NA
9 & 10 Circuit Common
Location of J9, the
Serial Port RS-232
Connector, on the
Printer‟s main circuit
board. Pins 1-9 (odds)
are bottom row, left to
right. Pins 2-8 (evens)
are top row, left to
right.
Pin 1 Pin 9
RS-232 Connector,
J9 Pinout
Mates with .1”X.1”
Socket Connector