Telpar, Inc. MTP Series Receipt Thermal Printer User Manual
2011 Telpar, Inc. (Rev.20110809)
Page 17
DIP
Switch
Position
Printer Function based on State of Switch
1
OFF = Normal Print Mode (normal operating mode for printer)
ON = Flash Memory Upload Mode
2
OFF = Paper cutter disabled (will not cut paper)
ON =
Paper cutter enabled (will cut paper)
3
Reserved for future use
4
OFF = Document Presenter disabled (no document presenter option on the printer)
ON =
Document Presenter enabled (printer has the document presenter option)
5
This setting pertains to models with the document presenter option only
OFF = Presenter paper loop enabled (prints first, cuts second, then delivers)
ON = Presenter paper loop disabled (delivers document while printing, then cuts)
6
Paper Roll Low Sensor (MTP-2822, MTP-2832, MTP-2242)
select which sensor to use:
OFF = Use Internal Paper Low Sensor on the board (standard configuration)
ON = Use External Paper Low Sensor on chassis side (optional configuration)
7
Reserved for future use
8
This setting pertains to the MTP-2283 only
OFF = Low Current Mode disabled (uses more current, faster printing)
ON = Low Current Mode enabled (uses less current, slower printing)
