Telpar MTP-1530II Receipt Thermal Printer User Manual
MTP-1530II User Manual (Revision 20120510)
Page 58
The special characters are SHIFT and the FUNCTION characters. SHIFT =
{S, FNC1 = {1, FNC2 = {2, FNC3 = {3, and FNC4 = {4. To specify the
character { send {{. The usage of FUNCTION characters depends on the
application program.
3.
In code set A the character just after SHIFT is processed as a character for
code set B. In code set the character just after SHIFT is processed as a
character for code set C. In code set C the SHIFT is invalid.
4.
HRI characters are not printed for the SHIFT characters or CODE SET
selection characters.
5.
HRI for a Function character is a space.
6.
HRI for a control code (00hex through 1Fhex, and 7Fhex) is a space.
7.
Errors in the data cause the bar code processing to abort, data following is
treated as normal data.
a.
The top of the data field is not a code set selection character.
b.
If a sequence {+n is invalid.
c.
Characters that can not be used in special code set.
Notes in standard Mode:
1.
If any invalid data is received, the printer only feeds paper and the following
data is treated as normal data.
2.
If the horizontal size exceeds the printing area, the printer only feeds paper.
3.
This command only feeds enough paper to print the bar code regardless of ESC
2 and ESC 3 settings.
4.
This command is valid only when there is no data in the print buffer. When
there is data in the print buffer, the data folm is treated as normal data.
5.
This command is not affected by print modes (emphasized, double-strike,
underline, character size, reverse video, or rotated print) but is affected by the
inverted print mode.
Notes in Page mode:
1.
This command develops the bar code data in the print buffer. The print position
moves to the right side dot of the bar code.
2.
If any invalid data is received, the printer stops command processing and the
following data is treated as normal data. The data buffer position does not
change.
3.
If the bar code width exceeds the printing area, the bar code is not printed but
the data buffer position moves to the left side of the printing area.
