V1.1-OCTOBER 2019 |
8
OMNIA MPX NODE MANUAL
4
Redundant Paths and Backup Scenarios
Dual Encoder, Single Decoder
In this illustration, a processor feeds two Encoders. Both Encoders send the same signal
over UDP to a single Decoder at the same IP and port address. If one of the links fails, the
Decoder picks up the stream from the other Encoder after a brief failover period. (An
external router may be required, depending on your link design).
Dual Encoder, Dual Decoder
In this illustration, a second Decoder is added to the above so that both Main and Backup
transmitters are both fed with signals served by separate network paths. (An external
router may be required, depending on your link design).
