f)
When the Beep mode is turned off a speaker with a slash through it appears just to the left of
the battery display.
g)
At the right top of the screen a battery icon will be displayed with capacity shown as three dots
within the outline of the battery. As battery capacity is reduced through use, the three dots will
become two dots then a single dot. The unit should be re-charged or the batteries replaced when
the display indicates 0 dots. For additional information on the battery please refer to Appendix
B.
The reception modes displayed are All or Selected ID codes, split or decimal data display and
diagnostic mode ON or OFF.
Key
Action
FN Displays Menu screen
DN Displays Message screen
UP Displays Power-up/Splash screen
Display
Line 1
Telonics Inc
Line 2
yyyy.mm.dd
Line 3
xx:xx #mxx
Line 4
all split dg
Date
24 hour time format / Number of stored messages
Displayed as configured
Message Screen
When Update mode is ON the Message screen is accessed automatically whenever a new message is
received or manually by pressing the DN key at the Main screen. The information displayed is the
date and time of the most recent message, current message number in list, the ID Code of the message,
the frequency on which the message was received, and the first data byte received. The latest
information is displayed until acknowledged by pressing the FN, DN, or UP key or when it is replaced
by reception of a new message. The antenna icon continues to flash on this screen and the envelope
icon appears, to alert the user of a new message until acknowledged. The beep tone will activate as
configured each time a new message is received. Once all received messages are acknowledged by
depressing the DN or UP key, the display returns to the Main screen and the envelope icon is
extinguished. As long as there are previously received messages in the stored message memory they
may be viewed by pressing the DN key. Messages are stored in a “circular” buffer memory. When the
maximum number of messages has been received, receipt of the next message will cause the oldest
message to be overwritten.
PB007326 Rev E
Page 5 of 24
