Tellur TLL331431, Руководство пользователя

Страница: 16 / 21

EN
4.Activate pairing mode for central unit
Once Tellur Smart app is installed on your device and you have added your smart device to
your app you will be able to control it.
7.FAILED TO ADD DEVICE?
- Make sure the device is powered on.
- Check the WiFi connection of your phone.
- Check if the device is in pairing mode. Reset your smart device to enter pairing mode.
- Check router or related: If you use a dual-band router, select the 2.4GHz network to add
the device. You also need to enable the router's broadcasting function. Set encryption
method as WPA2-PSK and authorization type as AES or set both on "auto".
- Check if the WiFi signal is strong enough. To maintain the signal strong, keep your router
and the smart device as close as possible.
- Wireless mode should be 802.11.b/g/n (WiFi 6 protocol 802.11ax is not supported)
- Make sure you don't exceed the maximum number of registered devices supported by the
app (150).
- Check if the router's MAC filtering function is enabled. If so, remove the device from the
filter list and make sure the router is not prohibiting the device connection.
- Make sure the WiFi password entered in the app is correct.
Can I control the device with 2G/3G/4G network?
When adding the device for the first time, the device and the phone need to be connected to
the same WiFi network. Once the device has been successfully paired with the Tellur Smart
app, you can remotely control it via 2G/3G/4G networks.
How can I share my device with family?
Open Tellur Smart app, go to "Profile" -> "Device sharing" -> "Sharing sent", tap "Add
sharing" and share the device with the added family members.
Notice - users must install the Tellur Smart app on their device in order to see shared
devices.
How can I manage the devices shared by others?
Open App, go to "Profile" > "Device Sharing" > "Sharing Received", then you can find the
devices shared by other users. To delete a shared device, swipe left.