ONT180C Installation and Turnup Guide
Page 23 of 38
Tools
The following list of tools should cover most typical ONT180C installations:
·
Screwdrivers or driver bits
o
Small slot screwdriver (1/8 inch) for attaching DC power wiring to a DC
power connector pigtail (for installations using remote bulk DC power or
the alternate AC adapter)
o
Screwdrivers or driver bits to fit the wood or machine screws, dry wall
anchor screws, or masonry anchor screws that will be used in mounting
the ONT to a wall or other surface
o
Medium slot screwdriver
·
Wire cutter/stripper (for installations using remote bulk DC power or the alternate
AC adapter)
·
Power drill and drill bits sized appropriately for screw pilot holes, and drywall and
masonry anchor holes (sizes required will depend on fastener selection)
·
Digital multimeter with test leads (a DMM with only basic functions will do) to test
power for DC remote power installations.
Supplies
The following list of supplies should cover most typical ONT180C installations (supplies
are locally sourced):
·
Fasteners
o
Select screws, drywall anchors, and masonry anchors of the appropriate
size for the light weight of the ONT and optional Wall Mounting Bracket (<
2 pounds). Make sure that the heads are large enough so they do not pull
through the mounting holes of the bracket.
·
DC power connectors
