31
5.2 Device settings menu
You can configure the device settings in the submenus available in the “
Devise settings
” menu.
Changing the device settings
: In order to change the device settings, first you have to read
the actual settings from the device by clicking on the “
Read
”
button in any submenu in
the “
Device settings
” menu. Writing the settings into the device using the “
Write
”
button
is not possible until the settings are read. After making changes in the settings, write the
settings into the device by clicking on the “
Write
”
button.
Overwriting the device settings
: If you want to completely overwrite the settings, you can
import and write data from a from a previously made system backup. To create a system
backup file, configure the desired settings in the submenus, and then click on the
“
Save to file
”
button in the “
General
” device settings menu. You can import the saved
backup
into the program using the “
Load from file
”
button, and then write imported
settings
into the device by clicking on the “
Write
”
button. This is useful when you want
to configure many devices with the same settings.
