T. E. L. L. SOFTWARE
HUNGÁRIA KFT
11
6
Web based interface of IP Bridge
Enter the module’s IP address into your
browser to open the web intarface (e.g.: 192.168.1.198) and enter the
username and password for login (see Figure 5.). To access the interface via Internet, enter into your browser
the
router’s
external IP address followed by the port number you
’ve
forwarded (e.g.: 93.189.143.72:8181). In
case the https redirect is enabled in the module, after connecting through http (port no. 80) automatically
redirects to https (port no. 443).
Figure 5. Login
The default login credentials are:
Username:
admin
Password
admin
After the first login change the default passwords.
To
add and manage additional users, the module has RADIUS server support that can be set in the „
RADIUS
server
” section of the „
Settings
” menu
.
If you enter incorrect username or password several times, the module will block the login from your IP address
for the duration that is set in the settings. The default setting blocks the login for an hour after 5 incorrect login
attempts.
After signing in, when you modify any module setting a red bar at the top of the page warns you to save the
changes. There is no functional difference between the Save and Cancel buttons at the bottom of the page and
on the warning bar.
