21
Example for modification of the stream URL, if using only one camera:
Original URL:
rtsp://192.168.1.240:554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Modified URL in case of using static IP address:
rtsp://
WAN IP
:554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Modified URL in case of using static IP address and username/password:
rtsp://
username:password@WAN IP
:554/cam/realmonitor?channel=1&subtype….
Modified URL in case of using domain name:
rtsp://
domain name
:554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
Modified URL in case of using domain name and username/password:
rtsp://
username:password@domain name
:554/cam/realmonitor?channel=1&subtype….
Further details and information on router configuration, port forwarding and dyndns
configuration you can find
in the “
Reference guide to the ONVIF camera support
function
” document.
5.3.8 E-mail report
The system is able to send the event log and monitored events by e-mail. If you wish to use
the system’s e-mail services, it is necessary to configure the internet access and the
outgoing e-mail account settings.
Type
: open the drop-down menu and select the report types which you wish to receive by e-
mail.
-
Event log
: a full event log can be sent daily or weekly.
-
Administration
: instant e-mail sending upon changing settings.
-
Unauthorized opening attempt
: instant e-mail sending when a user attempts
unauthorized control (out of entry period, in a restricted period, with hidden caller ID for
control modes 2…5, or if the user is unknown)
-
Open-Close
: instant e-mail sending upon user-initiated open-close control.
E-mail address
: enter the e-mail address to where you wish to receive the reports. You can
enter multiple addresses separated by comma.
Event log sending
: select the event log sending interval. The system will send the event
entries not sent yet but accumulated in the meantime, by the configured interval. There is an
exceptional case when the system does not send the event log by the configured interval.
This happens when the event storage is full. In this case the log is sent immediately when
the storage gets full. Thereafter it reverts to the normal sending interval.
Day
: if you have selected weekly sending, select which day the event log should be sent.
Time of day
: enter the time of day for event log sending.
