tell Gate Control BASE 1000 Series Скачать руководство пользователя страница 11

Страница: 11 / 55

4 Configuring the Gate Control BASE device

The

Gate Control BASE

device can be configured as follows:



by computer via USB, using the programming software



by computer over the Internet, using the programming software



by SMS, using a mobile phone

Remote programming over the Internet is only available when a SIM card with mobile Internet
access is installed in the

Gate Control BASE

device and the device has successfully connected

to the cloud. If you

wish to use the system’s Internet-based services, it is necessary to configure

in advance the settings needed for accessing the Internet. You can learn more about these
settings in the

“

SIM settings

” paragraph found in the “

General

” device settings chapter.

The

Gate Control

programming software is compatible with the following operating systems:



Windows 10 (32/64 bit)



Windows 8.x (32/64 bit)



Windows 7 (32/64 bit)

Installing the programming software

: open the software setup application and follow the

instructions of the installation wizard to complete the installation.
You can download the latest version of the programming software from

the manufacturer’s

website:

https://tell.hu/en/products/gsm-automation/gate-control-base

4.1 The user interface and configuration options of the software:

You can select the language of the user interface when you install the software.

You can change the appearance (skin) of the user interface using the

“

Skin

” dropdown-menu

found in the “

Settings

” menu under the “

Software settings

” menu group, where you can

choose out of several appearance themes.

The software saves the changes related to appearance upon closing and applies the saved
settings when reopened.

Содержание Gate Control BASE 1000 Series
























































Результаты поиска

Содержание Gate Control BASE 1000 Series

Отзывы:

Бренды по названию

Популярные бренды

tell Gate Control BASE 1000 Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Gate Control BASE 1000 Series

Отзывы:

Бренды по названию

Популярные бренды