WE310F5-X IP2WiFi Legacy AT Command Reference Guide
80664ST11079A Rev. 3
Page 7 of 79
2021-10-25
Not Subject to NDA
1.
INTRODUCTION
Scope
This document is aimed in providing a detailed specification on and a comprehensive
listing as a reference for the whole set of AT command supported by the WE310F5-X
module in legacy command mode.
Audience
This document is intended for Telit customers, who are integrators, about to implement
their applications using our WE310F5-X modules.
To use this document effectively, you should be already familiar with Telit modules and
their ease of controlling by means of AT Commands.
Contact Information, Support
For general contact, technical support services, technical questions and report
documentation errors contact Telit Technical Support at:
•
Alternatively, use:
For detailed information about where you can buy the Telit modules or for
recommendations on accessories and components visit
Our aim is to make this guide as helpful as possible. Keep us informed of your comments
and suggestions for improvements.
Telit appreciates feedback from the users of our information.
Symbol Convention
Table 1: Symbol Convention.
Danger: This information MUST be followed, or catastrophic
equipment failure or personal injury may occur.
Warning: Alerts the user on important steps about the module
integration.
