Telit Wireless Solutions ME310G1-W1 Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 96

background image

ME310G1 Hardware Design Guide

1VV0301588 Rev. 12

Page 88 of 96

2021-06-14

PRODUCT AND SAFETY INFORMATION

Copyrights and Other Notices

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

Although reasonable efforts have been made to ensure the accuracy of this document,
Telit assumes no liability resulting from any inaccuracies or omissions in this
document, or from the use of the information contained herein. The information in this
document has been carefully checked and is believed to be reliable. Telit reserves the
right to make changes to any of the products described herein, to revise it and to make
changes from time to time with no obligation to notify anyone of such revisions or
changes. Telit does not assume any liability arising from the application or use of any
product, software, or circuit described herein; neither does it convey license under its
patent rights or the rights of others.

This document may contain references or information about Telit’s products (machines
and programs), or services that are not announced in your country. Such references or
information do not necessarily mean that Telit intends to announce such Telit products,
programming, or services in your country.

Copyrights

This instruction manual and the Telit products described herein may include or describe
Telit’s copyrighted material, such as computer programs stored in semiconductor
memories or other media. Laws in Italy and in other countries reserve to Telit and its
licensors certain exclusive rights for copyrighted material, including the exclusive righ to
copy, reproduce in any form, distribute and make derivative works of the copyrighted
material. Accordingly, any of Telit’s or its licensors’ copyrighted material contained
herein or described in this instruction manual, shall not be copied, reproduced,
distributed, merged or modified in any manner without the express written permission of
the owner. Furthermore, the purchase of Telit’s products shall not be deemed to grant in
any way, neither directly nor by implication, or estoppel, any license.

Computer Software Copyrights

Telit and the 3

rd

Party supplied Software (SW) products, described in this instruction

manual may include Telit’s and other 3

rd

Party’s copyrighted computer programs stored

in semiconductor memories or other media. Laws in Italy and in other countries reserve
to Telit and other 3rd Party SW exclusive rights for copyrighted computer programs,

«
...
86
87
88
89
90
...
»

Содержание ME310G1-W1

































































































Отзывы:

Нет отзывов

Похожие инструкции для ME310G1-W1

AirPremier N DAP-3690

Бренд: D-Link Страницы: 23

AirPremier N DAP-3690

Бренд: D-Link Страницы: 8

AirPremier N DAP-2690

Бренд: D-Link Страницы: 52

AirPremier N DAP-2360

Бренд: D-Link Страницы: 12

AirPlus DWL-900AP+

Бренд: D-Link Страницы: 64

Бренд: Daikin Страницы: 2

Бренд: Paradyne Страницы: 86

IEEE 802.1n Wireless Series

Бренд: Longshine Страницы: 33

OmniAccess Stellar AP1301 Series

Бренд: Alcatel-Lucent Enterprise Страницы: 2

Бренд: Belkin Страницы: 40

Бренд: H3C Страницы: 19

Бренд: Mach Power Страницы: 24

Бренд: Eminent Страницы: 16

Бренд: Digisol Страницы: 82

Бренд: Samsung Страницы: 6

Бренд: Samsung Страницы: 38

Бренд: CreatComm Страницы: 40

Бренд: AirLive Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды