![Telit Wireless Solutions M.2 HN930 Скачать руководство пользователя страница 42](http://html1.mh-extra.com/html/telit-wireless-solutions/m-2-hn930/m-2-hn930_hardware-users-manual_1083700042.webp)
xN930 M.2 Hardware User Guide
3.11
No Connect Pins
The M.2 has several No Connect pins. The pins are not connected on the
M.2 module.
Table 21 No Connect Pins
Pins
Description
28, 29, 31, 35, 37, 38, 41, 43, 47, 49, 50, 52, 53,
54, 55, 56, 58, 68
No Connect Pins
10, 11, 12, 13, 14, 15, 16, 17, 18, 19
Notch
3.12
Antenna Interface
The M.2 module will have two antenna connectors, a main Rx/Tx antenna and a secondary
antenna that will be multiplexed between the Diversity receiver and GPS receiver (if
applicable).
The antenna signals are not available at the host interface but have their own
connectors. A diagram on the M.2 module with the location of the RF connectors
appears in Figure 10.
Table 22 Antenna Requirements
Requirement
Detailed Description
Connection
to module
The connector of WWAN antenna cable is Hirose W.FLT or equivalent
Multi-band
single antenna
Single antenna has to support all bands of WWAN module specified in the
Product
Rx
Diversity
Diversity antenna has to support all bands WWAN module specified in the
Product
GPS Antenna
The GPS antenna will share the Diversity antenna connector.
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 42 of 77