Telit Wireless Solutions LE910-SKG, Справочник команд AT

Страница: 17 / 273

LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 17 of 273
This is NOT a command, it is the error response to + Cxxx 3gpp TS 27.007 commands.
Syntax: +CME ERROR: <err>
Parameter: <err> - error code can be either numeric or verbose (see +CMEE ).The
possible values of <err> are reported in the table:
Numeric Format Verbose Format
General errors:
0 phone failure
1 No connection to phone
2 phone-adaptor link reserved
3 operation not allowed
4 operation not supported
5 PH-SIM PIN required
10 SIM not inserted
11 SIM PIN required
12 SIM PUK required
13 SIM failure
14 SIM busy
15 SIM wrong
16 incorrect password
17 SIM PIN2 required
18 SIM PUK2 required
20 memory full
21 invalid index
22 not found
23 memory failure
24 text string too long
25 invalid characters in text string
26 dial string too long
27 invalid characters in dial string
30 no network service
31 network time-out
32 network not allowed - emergency calls only
40 network personalization PIN required
41 network personalization PUK required
42 network subset personalization PIN required
43 network subset personalization PUK required
44 service provider personalization PIN required
45 service provider personalization PUK required
46 corporate personalization PIN required
47 corporate personalization PUK required
General purpose error:
100 unknown
770 SIM invalid
EPS related errors to a failure to perform an Attach:
103 Illegal MS (#3)*
106 Illegal ME (#6)*
107 EPS service not allowed (#7)*
111 PLMN not allowed (#11)*
112 Tracking area not allowed (#12)*