Bravo HW User Guide
1VV0301646 Rev. 1
Page
27
of
47
2020-03-23
UART & FTDI USB
Figure 14 - UART & FTDI USB
The ME910 main UART is available for use with:
•
FTDI Serial to USB converter on port J9
•
Arduino UART
•
Raspberry PI UART
•
Generic UART with full hardware handshake
Only one interface can be selected at a time using J6/J7 dip switches as described in the
table below:
Figure 15 - DIP Switch settings
Pin
Signal
I/O
Function
Type
Comment
