S50 Hardware User Guide
1VV0301505 Rev. 3
Page 48 of 60
2021-05-05
Not Subject to NDA
as follows. If the intended use of the end product asks for smaller distances a SAR
evaluation must be repeated with the end product.
•
Max. RF output power is +3.5dBm
•
Antenna peak Gain is +3dBi
•
Resulting max. RF output power is +6.5dBm = 4.5mW < 7mW
•
Table 1 of RSS-102 Issue 5 §2.5.1 shows that for 2450MHz the distance at 7mW
should be
≥
1cm
If the S50/AP is used with a different antenna as stated in 7.5OEM Layout and
Antenna Selection in Respect to RED/FCC/IC Certification, SAR evaluation has to be re-
newed.
9.3.5.
IC Labeling Requirements for the End Product
Any end product integrating the S50/AI or S50/AP must be labeled
with at least the following information:
This device contains transmitter with
FCC ID: RFR-S50
IC-ID:
4957A-S50
9.3.6.
IC Label Information S50
The S50/AI and the S50/AP show the IC-ID on the product label.
Model:
S50
The IC-ID is: 4957A-S50
9.4.
Bluetooth Qualification
The S50 is a qualified design according to the Bluetooth Qualification Program
Reference Document (PRD) V2.3.
The Declaration ID is:
D036717
The Qualified Design ID is:
108346
For further information about marking requirements of your product attention should be
paid the Bluetooth Brand Usage Guide at
https://www.bluetooth.org/en-us/bluetooth-brand/bluetooth-brand
Содержание BlueMod+S50
Страница 1: ...BlueMod S50 HW User Guide 1VV0301505 Rev 3 2021 05 05 Telit Technical Documentation...
Страница 60: ......
