S50 Hardware User Guide
1VV0301505 Rev. 3
Page 44 of 60
2021-05-05
Not Subject to NDA
9.
COMPLIANCES
The S50/AI and S50/AP have been tested to fully comply with the
appropriate EU, FCC, and IC directives.
CE testing is intended for end products only. Therefore, CE testing is not mandatory for a
Bluetooth module sold to an OEM end product. However, Telit provides CE tested
modules for customers to ease CE compliance assessment of end products and to
minimize test effort.
OEM end product compliance assessment must be done for every end product by the
OEM’s certification manager. It should be noted that compliance assessment doesn’t
necessarily mean re-testing in the test lab. Telit test reports are available on request and
can be used to drastically reduce the test plan and compliance testing costs.
Note/Tip: All certifications and declarations, except RoHS and ReacH,
are only valid for the S50 running with Telit FW. If the
FLASH is erased and a customer specific FW is loaded all
certifications must be re-evaluated or renewed.
Note/Tip: All measurements and certifications have been done for the
S50/AI with internal ceramic antenna and with a specific
external antenna for the S50/AP, which offers the RF signal
on a module pin. For the S50/AP the RED; FCC and IC
certifications stay valid if the OEM design follows exactly the
standalone test board trace design and uses exactly the same
antenna given in chapter 7.5 OEM Layout and Antenna Selection in
Respect to RED/FCC/IC Certification.
If this trace design is not the same or this specific antenna is not used
the following actions should be done.
•
RED Re-assess RED compliance
•
FCC Class II Permissive Change
•
IC Class II Permissive Change
9.1.
Declaration of Conformity CE
The S50/AI and the S50/AP do fully comply with the essential
requirements of the following EU directives:
•
RED 2014/53/EU
Содержание BlueMod+S50
Страница 1: ...BlueMod S50 HW User Guide 1VV0301505 Rev 3 2021 05 05 Telit Technical Documentation...
Страница 60: ......
