TG-7 Dual Path Series Installation & Operating Guide
i
56052601 Rev B © 2022 Telguard
Important Note
The registration form must be completed before leaving for the job site to install the Telguard
product. Use our dealer site at
to register the unit in real time.
Foreword
Dealers purchase Telguard
®
alarm communicators for the quality, features, and total value they
represent. Telguard TG-7 Dual Path Series devices meet UL and ULC standards for Commercial
Burglary and Commercial Fire systems. These devices can be used in Commercial Burglary,
Commercial Fire, or combination Burg/Fire systems as a dual path communication system, or as
the sole communication path, when applicable features are enabled.
Technical Support
Technical support for all Telguard products is available:
Toll Free: 800-229-2326, option 9
Monday Friday 8am 8pm ET
Saturday 9am 5pm ET
About this Manual
This manual assumes that you have basic security system installation skills such as measuring
voltages, stripping wire, properly connecting wires together, connecting wires to terminals, and
checking phone lines. It also assumes that you have a familiarity with the proper installation and
programming tasks related to various alarm panels.
The material and instructions covered in this manual have been carefully checked for accuracy
and are presumed to be reliable. However, Telguard assumes no responsibility for inaccuracies
and reserves the right to modify and revise this manual without notice.
It is our goal at Telguard to always supply accurate and reliable documentation. If a discrepancy
is found in this documentation, please send an email message to:
Or, write to:
Telguard Technical Services
3225 Cumberland Blvd
Suite 300
Atlanta, GA USA 30339
NOTE:
References in this manual to the TG-7 Dual Path Series product should be
construed to apply equally to the TG-7E and the TG-7FE product unless otherwise
indicated. Similarly, unless otherwise indicated, all information applies equally to
either the AT&T or Verizon model of either product.
